|
MOBOTIX MX-2WirePlus-Set-PW
MOBOTIX Mx2wire+ Set, Ethernet And PoE Via Two-Wire-Cable *** FREE Shipping in the U.S. ***
Email sales@CaliforniaPC.com for availability
MOBOTIX Mx2wire+ Set, Ethernet And PoE Via Two-Wire-Cable Mx2wire+ turns an existing two-wire cable into a modern multimedia cableUsing the Mx2wire+ system from MOBOTIX, an Ethernet network with PoE can be established using existing cables up to 500 m. This means that you can utilize a two-wire cable that is no longer in use (analog telephone line, antenna cable or bell wire, for instance) to connect a 10/100 Mbps Ethernet device such as a PC, WLAN, IP camera, IP telephone or IP door station without having to lay any new cables or implement any other constructional measures. An (identical) Mx2wire+ unit is required at both ends of the cable, and it automatically configures itself as either the sender or the receiver (MOBOTIX patent). - Ethernet and PoE data transfer using a two-wire cable • Simple connection of 10/100 Mbps Ethernet end devices (e.g., IP camera, IP telephone)
- Power supply for Mx2wire+ and end device via PoE/PoE+ or 48–57 V DC, 600 mA
- Connected end devices are supplied with up to 13 watts via PoE (PoE class 3)
- Maximum data transfer range of 500 m and data rate of up to 50 Mbps (depending on distance)
- No need for expensive and time-consuming installation of network cables
- Perfect for wireless communication is not possible (due to distance to sender, thickness of walls, etc.)
- Network extension, including PoE, by connecting a Cat7 cable of up to 500 m in length as a two-wire cable
- Simple installation in standard sockets (surface- or flush-mounted)
- Two LEDs display current connection and supply statuses
- Developed, produced and patented by MOBOTIX Germany
- Ambient temperature: -30 to 50°C / -22 to 122°F
- Complete set consisting of two Mx2wire+ units, on-walls sockets and mounting parts
- Ethernet and PoE data transfer using a two-wire cable • Simple
connection of 10/100 Mbps Ethernet end devices (e.g., IP camera, IP
telephone)
- Power supply for Mx2wire+ and end device via PoE/PoE+ or 48–57 V DC, 600 mA
- Connected end devices are supplied with up to 13 watts via PoE (PoE class 3)
- Maximum data transfer range of 500 m and data rate of up to 50 Mbps (depending on distance)
- No need for expensive and time-consuming installation of network cables
- Perfect for wireless communication is not possible (due to distance to sender, thickness of walls, etc.)
- Network extension, including PoE, by connecting a Cat7 cable of up to 500 m in length as a two-wire cable
- Simple installation in standard sockets (surface- or flush-mounted)
- Two LEDs display current connection and supply statuses
- Developed, produced and patented by MOBOTIX Germany
- Ambient temperature: -30 to 50°C / -22 to 122°F
- Complete set consisting of two Mx2wire+ units, on-walls sockets and mounting parts
|
|
|
|